V-Pulleys & Belts => Tensioning Tools => Tensioning Tools
Tensioning Tools
Having your belt drives tensioned correctly is critically important to get the best your of your drive. We offer a range of tensioning tools, both mechanical and electronic, to make sure that your drives will always perform at the power rating that they were designed for.
Optibelt-TT
The Optibelt-TT Belt Frequency Tensioner can measure a wide range of belts including standard V-belts, Kraftband belts, Micro-V belts and Timing belts. Simply line up the 2 red LED lights on the centre of the belt you wish to check and flick the belt with your thumb. The Optibelt-TT will measure the frequency at which the belt vibrates and show the reading in Hz on the screen. All you have do then, is compare the reading from the Optibelt-TT with the Optibelt CAP-6 calculation program to see if your belt is tensioned correctly. It does not matter how hard you flick the belt you will always get the correct reading. The Optibelt-TT is not affected by sounding noise or light levels so it can be used in many different applications. For difficult to reach belts you can bend the flexible neck in to the right shape so that the reading head is pointing correctly at the belt.
Brand:- Optibelt
 |
This item is available from our online store www.ptparts.com.au |
Optibelt Service Box
The optibelt laser pointer simplifies the alignment of belt drives. The belt pulleys are aligned to each other via the front or lateral faces. The laser pointer is simple to handle and can be fastened in a matter of seconds. This is a practical aid when professionally aligning belt pulleys.
Brand:- Optibelt
|
This item is available from our online store www.ptparts.com.au |
Opti Krik
The tension testers reliably inspect whether the kraftband or ribbed belt is of the correct tension level.This simplified tension method is intended to simplify the maintenance of belt drives for the fitter in the event that the most important technical data is unknown and the ideal tension level is unavailable.
Brand:- Optibelt
|
This item is available from our online store www.ptparts.com.au |
Laser Pointer
The Optibelt laser pointer II simplifies the alignment of belt drives. The belt pulleys are aligned to each other via the front or lateral faces. The laser pointer II is simple to handle and can be fastened in a matter of seconds. This is a practical aid when professionally aligning belt pulleys.
Brand:- Optibelt
|
This item is available from our online store www.ptparts.com.au |
Couplings
